To Next PageTo Next PageWhat to do if bubble air blower does not work in mspa D-NE02 Nest?
If the bubble air blower in your MSpa Hot Tub isn't working, it could be due to bubble motor failure, in which case you should contact the MSpa Service Center. Alternatively, the system might have auto-off after 10 minutes; wait for 10 minutes and then try turning on the Bubble button again.
Why is my mspa Hot Tub in an abnormal shape?
If your MSpa Hot Tub is in an abnormal shape, it could be due to extra air pressure caused by strong sunshine. Check the air pressure and release air if necessary. During hot weather, it's recommended to check if it's necessary to release some air to avoid any possible damage to the spa pool.
Details the items included in the spa package, illustrating components.
Essential steps for physically setting up the spa in its location.
Specific considerations for installing the spa inside a building.
Guidelines for setting up the spa in an outdoor environment.
Procedure for testing the Product Residual Current Protective Device for safety.
Steps for inflating the spa tub with air to its proper shape.
Instructions for deflating the spa tub.
Guide on how to fill the spa tub with water to the correct level.
Instructions for operating the spa cover's digital lock and buckle.
Explanation of the heater function and its indicator light.
Details on operating the filter function and its indicator light.
How to activate the bubble massage feature and its auto-off function.
How to adjust temperature settings using the up/down buttons.
Method to lock and unlock the control panel to prevent accidental changes.
How to set a timer for automatic heating or other functions.
Guidance on cleaning or replacing the filter cartridge based on usage.
Recommendations for checking spa water quality and adjusting chemical levels.
Describes cause and solution for error code E0 related to water temperature.
Details causes and solutions for error code E1 related to sensor or filter/heating.
Importance of sanitizing spa water to control bacteria and viruses.
Procedures for cleaning the filter cartridge and maintaining spa water quality.
Maintaining optimal pH, alkalinity, and chlorine levels for spa water.
Recommended chemicals and precautions for treating spa water.
Step-by-step instructions for draining the spa water.
Method for cleaning the spa tub interior after draining.
Instructions for repairing punctures in the spa tub or air bladder.
Steps for properly storing the spa components for off-season or future use.
Identifies causes and solutions for a blank control panel display.
Addresses common causes and solutions for water leaks in the spa.
Explains issues and fixes for the spa not heating correctly.
Troubleshooting steps for when the bubble blower function fails.
Solutions for the filter pump not operating.
Reasons and fixes for the spa tub losing its shape.
Troubleshooting steps for the spa losing air pressure.
Addresses causes and solutions for spa water becoming unclean.
Information regarding costs and procedures for returning defective parts.
Details the terms, conditions, and exclusions of the MSpa limited warranty.
Requirements and process for registering the product warranty.
General