16
Before using your power tool read
carefully the manual instructions
1. GENERAL INFORMATIONS
Dear client, may we congratulate you for
having chosen one of our products for your
garden.
The chainsaw has been manufactured in
accordance with the current safety regulations
which protect the consumer.
This manual describes and illustrates the
various operations for assembly, use and
maintenance which are required in order to
keep your chain saw in perfect condition.
TO FACILITATE READING
The illustrations about the assembly are to
be found on the back of cover, at the beginning
of this booklet. Keep this pages open while
reading the assembly instructions.
Should your chainsaw need servicing or
repair, please contact your retailer or an
authorised service centre.
2. TECHNICAL DATA
Voltage - Power
230 V - 2000 W
Power frequency
50 Hz
Sprocket speed (no load)
7600 1/min
Bar length
400 mm
Weigth
5,1 Kg
LpA (Sounding pressure)*
89 dB(A )
LWA (Sounding power)
106 dB(A )
Vibration level
8,5 m/s
2
* to ears of operator
ENGLISH
3. SYMBOLS
The following symbols are used throughout
this manual. Before read it they must be
known.
Denotes risk of personal injury, loss
of life or damage to the tool in case of
non observance of the instruction in
this manual.
Denotes risk of electric shock
Use always: safe t y helmet,
noisedamping earplugs, protective
gagglers or visor
Use always sturdy shoes not sliding.
Use always protective gloves.
Read the instruction manual.
Do not expose to rain.
Remove plug from the mains
immediately if cable is damaged or
cut.
Hold the chain saw with both
hands.
Suggested way of operating.
Danger of kickback.
To Next Page
Loading...
