Operation
5
9
Starting & Stopping the Engine
Refer to the Engine Operator’s Manual for instructions on starting
and stopping the engine.
Adjusting the Blower Direction
The air flow can be directed to one of three directions using the
blower direction lever to move the louvers.
NOTE: The blower direction lever must be in the middle position
when operating the blower with the chute attachment to keep it
locked in place.
1. Pull the lever out and away from the blower. See Fig. 5-1.
2. Move the lever to the left to direct airflow downward or to
the right to direct airflow upward.
3. Release lever towards blower.
WARNING! Exercise caution when operating
blower. Do not allow the directional discharge chute
to point in the direction of bystanders or pets
Blower
Direction
Lever
Louvers
Side View
Figure 5-1
To Next Page
Loading...
