MTD WHITE GT-185 - Hardware Pack Contents

CONTENTS OF HARDWARE PACK _
Remove this sheet from your owner’s manual and lay the hardware on the illustration for identification purposes.
After assembly, keep the Slope Gauge which is on the reverse side of this sheet for future use.
(Hardware pack may contain extra items which are not used on your unit.
Part numbers are shown in parentheses.)
A| ATTACHING THE DECK LINKS
ATTACHING THE DECK
0
muu((«i((K(((((((i((.
Eyebolts
(711-0817)
(Not Shown to
Scale) Quantity — 3
Hex Nuts
' 1/2-13 Thread
r 12-0206) Quantity — 3
NOTE: This
hardware may
be assembled
to the deck.
Flat
Washers
1/2” I.D.^
(736-0192)
o
—Rear
Axle Bolts
2-1/4” Long
(738-0533)
Lock
Washers
3/8" I.D. -
(736-0169)
Hex Nuts
3/8-16 Thread ■
(712-0798)
Cut
Along
T,