MTS Sensors Temposonics E-Series Brief Instructions

Temposonics
®
E-Series
Brief Instructions
I 3 I
1. Introduction
1.1 Purpose and use of this manual
Before starting the operation of Temposonics
®
position
sensors read this documentation thoroughly and follow
the safety information. Keep the manual for future
reference!
The content of this technical documentation is intended to
provide information on mounting, installation and commis-
sioning by qualified automation personnel
1
or instructed
service technicians, who are familiar with the project plan-
ning and dealing with Temposonics
®
position sensors.
1.2 Used symbols and warnings
Warnings are intended for your personal safety and for avoid-
ance of damage to the described product or connected devic-
es. In this documentation, safety information and warnings to
avoid danger that might affect the life and health of operating
or service personnel or cause material damage are highlight-
ed by the preceding pictogram, which is defined below.
Symbol Meaning
NOTICE
This symbol is used to point to situations
that may lead to material damage, but not
to personal injury.
1/ The term qualified technical personnel characterizes
persons who:
• are familiar with the safety concepts of automation
technology applicable to the particular project
• are competent in the field of electromagnetic
compatibility (EMC)
• have received adequate training for commissioning and
service operations
• are familiar with the operation of the device and know the
information required for correct operation provided in the
product documentation

MTS Sensors Temposonics E-Series Specifications

General

Brand	MTS Sensors
Model	Temposonics E-Series
Category	Accessories
Language	English