Need help?Do you have a question about the MTS Sensors Temposonics R-Series Ethernet/IP and is the answer not in the manual?
General| Category | Accessories |
|---|---|
| Interface | Ethernet/IP |
| Series | R-Series |
| Manufacturer | MTS Sensors |
| Product Line | Temposonics |
Defines the proper applications for Temposonics sensors in industrial, commercial, and laboratory settings.
Outlines prerequisites for safe and proper operation, emphasizing qualified personnel.
Provides instructions and wiring diagrams for connecting the sensor to a control system.
Guidance on configuring the sensor's IP address for network communication.
Step-by-step instructions for assigning a permanent IP address using BOOTP/DHCP Server.
Procedure for installing the EDS file to integrate the sensor into RSLogix5000.
Steps for adding the sensor to the I/O configuration using EDS or as a generic module.
Details on configuring the sensor module and setting the Requested Packet Interval (RPI).
Explanation of controller tags and how to configure data bytes for sensor readings.
Instructions on modifying configuration values like Data Format, Resolution, and Measuring Direction.
Directs users to the operation chapter for error handling and troubleshooting information.
Detailed steps for resetting the sensor's IP address back to DHCP mode.
To Next Page
