EasyManua.ls Logo

MTU 16 V 2000 G45 User Manual

MTU 16 V 2000 G45
155 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operating Instructions
Diesel engine
12 V 2000 G25, G25 TB
12 V 2000 G45, G45 TB
12 V 2000 G65, G65 TB
12 V 2000 G85, G85 TB
16 V 2000 G25, G25 TB
16 V 2000 G45, G45 TB
16 V 2000 G65, G65 TB
16 V 2000 G85, G85 TB
18 V 2000 G25, G25 TB
18 V 2000 G45, G45 TB
18 V 2000 G65, G65 TB
18 V 2000 G85, G85 TB
Application group 3A
MS15018/02E

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the MTU 16 V 2000 G45 and is the answer not in the manual?

MTU 16 V 2000 G45 Specifications

General IconGeneral
Engine TypeDiesel
Number of Cylinders16
AspirationTurbocharged
Fuel SystemCommon Rail
Cooling SystemLiquid-cooled
Emissions ComplianceIMO Tier II

Summary

Operating Instructions

1 Safety

1.4 Safety regulations for startup and operation

Rules for safe startup, operation, and emergency stop procedures.

1.5 Safety regulations for maintenance and repair work

Precautions before, during, and after maintenance and repair.

1.6 Fire prevention and environmental protection, fluids and lubricants, auxiliary materials

Guidelines for fire prevention, noise, environmental protection, and proper disposal.

2 General Information

2.2 Engine – Overview

Visual identification and labeling of major engine components.

2.3 Sensors and actuators – Overview

Identification and function of key sensors and actuators on the engine.

3 Technical Data

3.1 12/16/18 V 2000 Gx5 engine data, optimized fuel consumption

Performance data and specifications for Gx5 engine models under reference conditions.

3.2 12/16/18 V 2000 Gx5-TB engine data, optimized fuel consumption

Performance data and specifications for Gx5-TB engine models under reference conditions.

4 Operation

4.1 Putting the engine into operation after extended out-of-service periods (>3 months)

Procedures for recommissioning an engine after long-term storage.

4.3 Engine – Starting in manual mode (test run)

How to start the engine manually for testing purposes, including safety.

4.5 Operational checks

Essential checks to perform during engine operation and at nominal speed.

4.7 Engine – Emergency stop

How to perform an emergency stop and subsequent actions.

5 Maintenance

6 Troubleshooting

6.1 Fault indication on SAM display – Genset applications

Understanding SAM display fault messages, indicators, and alarm meanings.

6.2 Troubleshooting

Common engine problems, probable causes, and suggested tasks for resolution.

7 Task Description

7.2 Cylinder Liner

Examination and assessment of cylinder liner condition using endoscopic methods.

7.5 Injection Pump / HP Pump

Procedures for replacing, removing, and installing the injection pump.

Related product manuals