7.14.2 Centrifugal oil filter – Cleaning and filter-sleeve replacement
Preconditions
☑ Engine is stopped and starting disabled.
Special tools, Material, Spare parts
Designation / Use Part No. Qty.
Strap wrench
F30379104 1
Cold cleaner (Hakutex 50)
50622 1
Filter sleeve
(→ Spare Parts Catalog)
O-ring
(→ Spare Parts Catalog)
O-ring
(→ Spare Parts Catalog)
WARNING
Compressed air
Risk of injury!
• Do not direct compressed-air jet at persons.
• Wear protective goggles / safety mask and ear protectors.
Centrifugal oil filter – Rotor removal
1. Release nuts (3).
2. Remove housing cover (1).
3. Remove complete rotor (2) from housing.
106 | Task Description | M015650/03E 2011-10
TIM-ID: 0000006418 - 001
To Next Page