16. Tighten nut (3) to specified tightening torque using a torque wrench.
Name Size Type Lubricant Value/Standard
Nut M16 Tightening torque (Engine oil) 30 Nm +3 Nm
17. Fit seal (10).
18. Install cover.
19. Install screw (1), washer (2) and nut (9).
20. Tighten nut (9).
21. Open ball valve at the inlet and outlet of the fuel treatment system.
Result: The fuel treatment system is ready for operation.
130 | Task Description | M015650/03E 2011-10
TIM-ID: 0000007735 - 005
To Next Page
Loading...
