Fuel prefilter
– Differential pressure gauge
– Check and adjustment 91
– Draining 92
– Filter element
– Replacement 95
Fuel prefilter – Flushing 93
Fuel system – Venting 88
Fuel treatment system
– Start-up 49
Fuel treatment system
– Shutdown 57
– Switching on 52
G
General conditions 7
H
HT coolant pump
– Relief bore check 119
I
Injector
– Removal and installation 86
Injector – Replacement 85
Installation locations for SOLAS shielding 66
Intercooler – Checking condensate drain line for coolant
discharge and obstruction 97
M
Maintenance and repair work
– Safety requirements 11
MTU contact persons 142
O
Operational checks 51
P
Personnel and organizational requirements 8
Plant
– Cleaning 58
Product description 18
Pump capacity
– Check 128
Putting the engine into operation after scheduled out-of-
service period 46
R
Raw water pump – Relief bore check 122
S
Safety instructions 16
Sensors, actuators and injectors
– Overview 26
Service indicator
– Signal ring position check 100
Service partners 142
SOLAS shielding - Installation 65
SOLAS shielding as per MTN 5233 – Installation 64
Starter
– Condition check 101
Starting the engine 53
Startup and operation
– Safety regulations 10
Stopping the engine 54
T
Tasks
– After extended out-of-service periods 47
Tasks after extended out-of-service periods (>3 weeks)
47
Transport 9
Troubleshooting 61
– Fuel treatment system 60
V
Valve clearance – Check and adjustment 81
W
Water drain valve
– Check 125
Water level probe (3-in-1 rod electrode)
– Check 127
Wiring - engine
– Check 131
M015650/03E 2011-10 | Appendix B | 147
DCL-ID: 0000014355 - 002
To Previous Page