MTU 16V2000G series User Manual

Operating Instructions
Diesel engine
12V2000Gx6x
16V2000Gx6x
MS15054/00E

MTU 16V2000G series Specifications

General

Brand	MTU
Model	16V2000G series
Category	Engine
Language	English

Summary

1 Safety

1.1 Important provisions for all products

Key safety guidelines, nameplate information, and intended use of the product.

1.2 Personnel and organizational requirements

1.4 Safety regulations for startup and operation

Procedures and precautions for safe engine startup, operation, and emergency stops.

1.5 Safety precautions when working on the engine

Guidelines for maintenance, repair, welding, and hydraulic work safety.

1.6 Fire prevention and environmental protection, fluids and lubricants, auxiliary materials

Safety measures for fire prevention, noise reduction, and proper handling of fluids.

3 Technical Data

3.1 Engine data 12V/16V2000Gx6S, 3B, continuous operation, variable load, ICXN, optimized fuel consumption (provisional)

Technical specifications for 12V/16V2000Gx6S engines in 3B application.

3.2 Engine data 12V/16V2000Gx6S, 3D, standby current, fuel stop power (IFN), optimized fuel consumption (provisional)

Technical specifications for 12V/16V2000Gx6S engines in 3D application.

3.3 Engine data 12V/16V2000Gx6S, 3F, standby operation mode, unlimited, ICXN, optimized fuel consumption (provisional)

Technical specifications for 12V/16V2000Gx6S engines in 3F application.

3.4 Engine data 12V/16V2000Gx6S, 3G, continuous operation, time-limited, ICXN, optimized fuel consumption (provisional)

Technical specifications for 12V/16V2000Gx6S engines in 3G application.

3.5 Engine data 12V/16V2000Gx6S, 3H, standby operation mode, special qualifications, optimized fuel consumption (provisional)

Technical specifications for 12V/16V2000Gx6S engines in 3H application.

3.6 Engine data 12V/16V2000Gx6S, 3B, continuous operation, variable load, ICXN, EPA Nonroad T2 (40CFR89) (provisional)

Technical specifications for 12V/16V2000Gx6S engines in 3B application with EPA T2.

3.7 Engine data 12V/16V2000Gx6S, 3D, standby current, fuel stop power (IFN), EPA Nonroad T2 (40CFR89) (provisional)

Technical specifications for 12V/16V2000Gx6S engines in 3D application with EPA T2.

3.8 Engine data 12V/16V2000Gx6S, 3F, standby operation mode, unlimited, ICXN, EPA Nonroad T2 (40CFR89) and EPA Stationary EMERG T2 (40CFR60) (provisional)

Technical specifications for 12V/16V2000Gx6S engines in 3F application with EPA T2/EMERG T2.

3.9 Engine data 12V/16V2000Gx6S, 3G, continuous operation, time-limited, ICXN, EPA Nonroad T2 (40CFR89) (provisional)

3.10 Engine data 12V/16V2000Gx6S, 3H, standby operation mode, special qualifications, EPA Nonroad T2 (40CFR89) and EPA Stationary EMERG T2 (40CFR60) (provisional)

4 Operation

4.1 Putting the engine into operation after extended out-of-service periods (>3 months)

4.2 Putting the engine into operation after scheduled out-of-service-period

4.3 Starting the engine

Instructions and safety precautions for starting the engine.

4.4 Operational checks

4.6 Engine shutdown

4.7 Emergency engine stop

How to perform an emergency engine stop and subsequent actions.

4.8 After stopping the engine

5 Maintenance

5.1 Maintenance task reference table [QL1]

6 Troubleshooting

6.1 Troubleshooting

Common engine issues (startup, firing, speed) and their causes/actions.

6.2 Engine Control Unit – ECU9 fault messages

List of ECU9 fault messages, causes, and corrective actions.

7 Task Description

7.1 Engine

7.3 Valve Drive

7.4 Injector

7.6 Fuel Filter

7.9 Starting Equipment

7.10 Lube Oil System, Lube Oil Circuit

7.12 Coolant Circuit, General, High-Temperature Circuit

7.13 Low-Temperature Circuit

7.17 Engine Governor