MTU 18V2000G65 - Page 66

Fault
code no. Full designation Meaning Action
Setting parame-
ter no.
472 AL Stop SD Engine stop as shutdown
channels have "sensor fault"
(alarm configuration parame-
ter, see PR 2.8008.100 for
explanation).
Contact Service. 2.8006.593
474 AL Wiring FO Line break or short circuit at
channel FO (alarm configura-
tion parameter, see PR
2.8008.100 for explanation).
Contact Service. 2.8006.655
475 AL CR Trigger Engine
Stop
Tripped by crash recorder
triggering due to engine shut-
down.
Replace engine gov-
ernor at next oppor-
tunity.
1.8010.009
476 AL Crash Rec. Init. Er-
ror
Initialization error of crash re-
corder.
Contact Service. 1.8010.007
478 AL Comb. Alarm Yel
(Plant)
YELLOW combined alarm
from plant (alarm configura-
tion parameter, see PR
2.8008.100 for explanation).
Contact Service. 2.8006.001
479 AL Comb. Alarm Red
(Plant)
RED combined alarm from
plant (alarm configuration pa-
rameter, see PR 2.8008.100
for explanation).
Contact Service. 2.8006.002
480 AL Ext. Engine Protec-
tion
External engine protection
function active (alarm config-
uration parameter, see PR
2.8008.100 for explanation).
Contact Service. 2.0291.921
555 AL Call MTU Field Serv-
ice
Power reduction caused by
maintenance function (main-
tenance concept, alarm con-
figuration parameter, see PR
2.8008.100 for explanation).
Contact Service. 2.0555.001
66 | Troubleshooting | MS15018/03E 2016-02
TIM-ID: 0000008508 - 003