MTX MUD100.2 - Troubleshooting Common Issues; Output Distortion; Blowing Fuses

MTX.COM
5
INSTALLATION
For proper performance and safety, MTX recommends installing an inline fuse per the owner’s
manual instructions according to the following.
TROUBLESHOOTING
MUD100.2 15A Fuse
Problem Cause Solution
Output Distorted
Head Unit Volume Set Too High Lower Head Unit Volume
Amplifier Gain Set Too High Lower Amplifier Gain
Balance Reversed
Speaker Wire L & R Reversed Correct Speaker Wire Orientation
RCA Inputs Reversed Reverse RCA Inputs
Bass is Weak
Speakers Wired Out of Phase Wire Speakers with Correct Phase
Not Using MTX Subwoofers Buy MTX Subwoofers
Blowing Fuses
Excessive Output Levels Lower the Volume
Amplifier Defective Return for Service