Need help?Do you have a question about the MTX Terminator TR600-1 and is the answer not in the manual?
Adjusts input sensitivity, low-pass/high-pass crossover points, and phase for optimal sound.
Details RCA and speaker-level inputs, RCA outputs, and speaker terminal connections.
Explains power/protection LEDs, fuse, power, remote, and ground terminals for system operation.
Describes the port for connecting the optional External Bass Control (EBC) remote.
Disconnect battery, select a suitable mounting location with good airflow for cooling.
Covers installing power/ground cables, fuse/breaker, and remote turn-on wire for safe operation.
Details connecting signal sources via RCA or speaker-level inputs and attaching speakers to terminals.
Verify all connections, reconnect battery, and power on the system.
General| Power Output (RMS) | 600W |
|---|---|
| Number of Channels | 1 |
| Frequency Response | 20Hz - 20kHz |
| THD at Rated Power | <1% |
| Signal to Noise Ratio | >90dB |
| Fuse Rating | 30A |
| Impedance | 2Ω |
| Bass Boost | 0-12dB |
To Next Page
