3
• Unique rubber Insulated Iso-Feet™
• Nickel-plated, heavy duty terminal block type connectors
• Speaker and low level inputs
• Input select 2CH/4CH switch on RT404 functions as a built-in Y connector
• Color-coded wire harness for speaker level input installation
• Smart-Engage™ auto-turn on for easy integration with factory head units
• Built-in, defeatable18dB/octave HP/LP crossover at 85 Hz
• RT404 front channel crossover is a defeatable18dB/octave, high pass, at 85Hz
• Adjustable input sensitivity
• Bridgeable, multi-channel circuit design
• Regulated PWM Mosfet Switching Power Supply
• New, more reliable high powered transformers
• Buffered, isolated output for daisy chaining multiple amplifiers
• Pure N-Channel Design
• Intelligent Surface Mount Technology
• Class A 100% discrete driver circuit topology
• Real-time computerized protection circuit
• Anti-shock PCB mounting design
• Acoustically Seamless Turn-on/Turn-off
Features
Specifications
RT202
RMS Power measured at 14.4 Volts DC:
37.5 Watts x 2 into a 4 Ohm load with < 1% THD
75 Watts x 2 into a 2 Ohm load with < 1% THD
150 Watts bridged into a 4 Ohm load with < 1% THD
Dynamic Power measured at 14.4 Volts DC:
50 Watts x 2 into a 4 Ohm load
100 Watts x 2 into a 2 Ohm load
200 Watts bridged into a 4 Ohm load
Signal to Noise Ratio: 100dB A-Weighted
(Referenced to Rated PWR at 1VRMS Input Sensitivity)
Frequency Response: 20-20,000 Hz ±.25dB
Crossover: Defeatable, 18dB/octave at 85 Hz,
selectable for high pass, low pass
Dimensions: Including Iso-Feet™
7.98" x 9.75" x 2.1" (20.3cm x 24.8cm x 5.3cm)
RT404
RMS Power measured at 14.4 Volts DC:
37.5 Watts x 4 into a 4 Ohm load with < 1% THD
75 Watts x 4 into a 2 Ohm load with < 1% THD
150 Watts x 2 bridged into a 4 Ohm load with < 1% THD
Dynamic Power measured at 14.4 Volts DC:
50 Watts x 4 into a 4 Ohm load
100 Watts x 4 into a 2 Ohm load
200 Watts x 2 bridged into a 4 Ohm load
Signal to Noise Ratio: 100dB A-Weighted
(Referenced to Rated PWR at 1VRMS Input Sensitivity)
Frequency Response: 20-20,000 Hz ±.25dB
Crossover: Defeatable, 18dB/octave at 85 Hz,
selectable for high pass, low pass, or full range on
rear channels and high pass or full range for front
channels
Dimensions: Including Iso-Feet™
11.5" x 9.75" x 2.1" (29.2cm x 24.8cm x 5.3cm)
To Next Page