MTX Thunder6500D - Product Features; Key Amplifier Features; Product Specifications; THUNDER4250 D Specifications

Features
l
Intelligent Surface Mount Technology
l
Patented PWM MOSFET Switching Power Supply (#5,598,325)
l
Adaptive Class D Technology
l High Powered Transformer
l
High Powered stacked inductor
l Pure N-Channel Design
l
Doubles power into 2 ohms
l
Real lime Computerized Protection Circuit
l
Color-coded wire harness for speaker-level input installation on Thunder4250D and 65000
l
Smart-EngageTM auto turn on for easy integration with factory head units Thunder4250D and 6500D
l
Acoustically Seamless Turn-on/Turn-off (i.e. no noise)
l
Variable frequency low-pass crossover, 40Hz to 200Hz. 24dB/octave low pass
l
Defeatable compression circuit included on Thunder6500D and Thunder810000
l
Continuously adjustable and defeatable Bass EQ enhancement circuitry, centered at 40Hz
l Low level inputs
l
EBC - External Bass Control Port with an additional 3dB of gain when used, and 23dB attenuation
l Adjustable input sensitivity
l
Buffered RCA Outputs for daisy-chaining additional bass amplifiers
l
Nickel-plated, heavy duty terminal block type connectors
l
Unique rubber Insulated Iso-FeettM
Smecifications
THUNDER4250D
THUNDER81000D
RMS Power measured at 12.5 Volts DC:
125 Watts x 1 into a 4 Ohm load with less than 1% ThdrN
250 Watts x I into a 2 Ohm load with less than 1% ThdtN
Dynamic Power measured at 14.4 Volts DC
200 Watts x 1 into a 4 Ohm load
350 Watts x 1 into a 2 Ohm load
S~goal to Noise Ratio: >lOOdB A-Welghted
Damping Factor: ,200
Frequency Response: ZOHz-200Hz
Maximum Input: avrms
Thunder E(1: Variable Bass Boost IO-lad61 centered at 40Hz
Crossover: Variable 4OHz to 200Hz. 24dBioctave low pass
Dimensions: 7” x 9 15” x 2” (17.8cm x 24.&m x 5.lcm)
9.9’ x 9.75” x 2.1” (23.6cm x 24&m x 5.3cm) Including lsoFe@
RMS Power measured at 12.5 Volts DC:
500 Watts x I into a 4 Ohm load with less than 2% ThdtN
1000 Watts x I into a 2 Ohm load with less than 2% ThdtN
Oynamfc Power measured at 14.4 Volts DC
a50 Watts x I into a 4 Ohm load
1500 Watts x 1 into a 2 Ohm load
Signal to Noise Ratio: tlOOdB A-Welghted
DampIng Factor: >I00
Frequency Response: ZOHz-200Hz
MaxImum Input: BVrms
Thunder E(1: Variable Bass Boost IO-l8dB) centered at4OHz
Crossover: Variable 40Hz to 2WHz. 24dBioctave low pass
0imenslons:lM” x 9.75” x 2”.(40.lcm x 24.8cm x 5.lcm)
17.K x 9.W x 2.1’ I45 2cm x 24.8cm x 5.3cm) Including IsoFeerM
Recommended Fuse = 150A
THUNDER6500D
RMS Power measured at 12.5 Volts DC:
250 Watts x I into a 4 Ohm load with less than 1% ThdtN
500 Watts x 1 mto a 2 Ohm load with less than I% ThdtN
Dynamic Power measured at 14.4 Volts DC
450 Watts x I mto a 4 Ohm load
775 Watts x I mto a 2 Ohm load
Signal to Noise Ratio: >lOOdB A-Welghted
Damping Factor: ,200
Frequency Response: ZOHz-200Hz
Maximum Input: BVrms
Thunder EtI Variable Bass Boost IO-18dBl centered at40Hz
Crossover: Variable 40Hz to 2WHz. 24dBloctave low pass
Dimensions: 11.5” x 9.75” x 2” (29.2cm x 24.8cm x 5.lcm)
13.9” x 9.75” x 2.1” (36.6cm x 24.8cm x 5.3cm) Including lsoFeeCM