MUCAR CDE900 PRO has 12 main modules, Code/Freeze Frame, Erase, Live Data Stream, O2 Sensor Test, EVAP System Test, On Board Monitor, Version info, DTC Lookup,
Expand, Report, Settings.
4.6.1 Plug in the OBD diagnostic cable after the car is turned on, and the device will automatically scan for OBD protocols (wait while scanning).
Note: You can click "SMOG" to see the corresponding supported protocols, gray protocols are not supported, green without fault codes, red with fault codes.
4.6.2 Select "Code/Freeze Frame" to view fault codes and freeze pins. Select "Read Codes", and select vehicle model to view dtc. Select "View Freeze Frames"
monitor status since DTCs cleared, view the engine's current power system diagnostics.
Read Codes: Quick View Engine DTCs.
4.6.3 Select View Freeze Frames, monitor status since DTCs cleared, View the engine's current power train diagnostics.
·Combine: The graphs can be merged for easier comparisons.
To Next Page
Loading...
