EasyManua.ls Logo

Mud-Skipper 210 - PRE-OPERATION INSPECTION; Fuel Inspection; Air-cleaner Inspection; Engine Oil Inspection

Mud-Skipper 210
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Engine Oil
·Use the engine oil grade depending on ambient temperature using the
table below
Note: Recommended engine oil: SAE
5W-40 mineral oil use only
Do not add commercial additives to the oil.
Do not mix gasoline into the oil
Before starting, be sure to conduct an oil
check.
Place the engine on a level surface when
adding oil and conducting inspections;
WARNING:
Engine is shipped without oil.
If using the engine on a Longtail, or Twister, the engine will be operated on
an angle, not level. Consequently, the oil sensor must be disabled. It is
installed for applications where the engine is operated on a level plane)
YOU MUST CHECK THE OIL LEVEL EVERY TIME YOU OPERATE
YOUR ENGINE.
WE WILL NOT ACCEPT RETURNS FOR SEIZED ENGINES DUE TO
LACK OF OIL.!
Page 4