EasyManua.ls Logo

Mud-Skipper 210 - STARTING AND STOPPING THE ENGINE; Starting the Engine

Mud-Skipper 210
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PRE-OPERATION INSPECTION
Fuel Inspection
·Is there fresh gasoline in the tank?
·Is old gasoline being used? If so, remove it and replace with fresh gasoline
·Is the fuel tank cap closed correctly?
WARNING:
Air-cleaner Inspection
Foam filters should be washed in detergent, dried and lightly impregnated
with oil. Paper filters should be replaced.
Engine Oil Inspection
Check the engine filled with the recommended engine oil, and
the oil is clean If not, replace it. You should replace it every season.
Inspect the Tightness of all Fastener Screws
Check the screws used to fasten the muffler (Do this when the muffler is
cold)
Fuel and Oil Leaks Inspection
Check for oil and fuel leaks and make the necessary repairs.
Page 5