18
Moisture, vibration, and extreme temperature can cause severe damage to your trail camera
and should be avoided. Keeping your camera free from moisture and vibration and using in the
correct temperatures will assure you many years of maintenance free service and operation.
MOISTURE:
Although the Pro-Cam trail camera has a very durable waterproof membrane inside the
molded ABS material shell, care must be taken to prevent water damage.
• NEVER mount your trail camera upside down or leave the case open for an extended period
of time.
• NEVER change batteries, camera settings, or SDHC Cards in heavy rain.
• If your camera would happen to get water inside, remove the batteries immediately and allow
the camera to dry out for several days before activating it.
VIBRATION:
Like any electronic device, your Pro-Cam trail camera is designed with many small electronic
components that are very sensitive to vibration. Failure to follow careful handling and trans-
port may cause extreme and irreparable damage to your camera.
• NEVER drop the camera on a hard surface
• ALWAYS transport your camera in a method to avoid bouncing around or vibration
TEMPERATURE:
Recommended storage and operating temperature: -10°F to 140°F. NOTE: Battery life and
functions may discontinue or experience shortness in extreme cold/warm temperatures
• NEVER store your camera in a vehicle or other contained environment with extremely high
temperatures for an extended period of time!
CAMERA CARE:
To Next Page
Loading...
