De-Scaling Your Brewer
content of the water, calcium deposits or scale may build up in your Brewer. Scale
Brewer that come in contact with water.
performance or when there are white deposits in the reservoir. It is possible for
damp lint-free cloth and running three rinse brews without a K-Cup® pack.
If your Brewer has been in an environment below freezing, please be sure to let
it warm to room temperature for 2 hours before using.
To de-scale the Brewer:
Step 1: Make sure you have at least 8 ounces of undiluted white vinegar on hand.
You will also need a 10 oz ceramic mug (do not use a paper cup) and access to a
sink.
Step 2: Fill reservoir with 8 ounces of undiluted white vinegar, place a ceramic
mug on the Drip Tray Plate.
Step 3: Close the brew head and perform a brew into the ceramic mug without
adding a K-Cup® pack.
then allow it to sit for at least 30 minutes.
K-Cup® pack. Empty the contents of the ceramic mug into the sink, be careful as
contents may be hot.
place a cup on the Drip Tray Plate and perform a brew.
place) to clean the Brewer plumbing and get rid of any residual taste from the
vinegar. The Brewer is now ready for normal use again.
12
To Next Page
Loading...
