1. Place Brewer upright on a flat surface, remove all product
packaging and plug into outlet.
2. Remove reservoir and reservoir lid,
then fill with water to the
MAX FILL line.
3. Replace reservoir lid and place
reservoir on top Brewer.
K-Cup® pack into the k-cup pack housing, do not
peel off the foil cover of the k-cup pack.
4. **The appliance has water level senser, if water
level is lower than Min line, the brewer will not be allowed to make a
light in the water level indicator.
CAUTION: Avoid the sharp piercing pin
inside the brew head (even it will be
hidden when the handle is opened)
HOW TO BREW
7
To Next Page
Loading...
