42
43
Operation drive
You control the motor of your muli st using the keys on the control units on
the handlebars. Familiarize yourself with all keys and functions of the control
units on the handlebars. Detailed information on the controls can be found in
chapter 11 „Motor unit and control unit“ in this manual, in the enclosed Shimano
Steps user manual series E6100 or on the net at:
Shimano Steps system manual on the website:
https://si.shimano.com/pdfs/um/UM-79E0A-002-01-GER.pdf
The Pendix drive is controlled directly on the battery. The drive comes without
additional displays and control units on the handlebars. The three dierent
support levels are selected vi the rotary wheel on the battery. For more detai-
led information, please refer to chapter 11 „Motor unit and control unit“ in this
manual, the enclosed Pendix system manual or on the web at:
Do not operate the selector wheel on the Pendix battery
while driving.
Tires
Check the air pressure of the tires before the rst ride. The information on the
prescribed tire pressure can be found on the side surfaces of the tires. The tires
on the muli are selected to have relatively large volume, so you can achieve
pleasant shock absorption when driving with slightly lower air pressure. Always
adhere to the specications for the minimum and maximum pressure. Check the
tires and rims for damage, cracks and deformation before the rst ride.
The system manual of the Pendix drive can be found on the website in the down-
load area:
https://pendix.de
Before the rst ride
To Next Page
Loading...