muli ST+PX - Battery and Control Unit Px

60
61
Switching the drive on/off
Activate the drive by pressing the
On/O button on the battery. The
LED display on the battery shows
you the charge level.
More detailed information on the
battery charge level display can
be found in the enclosed Shimano
E6100 user manual on p. 19. Press
the button again to deactivate the
drive and the LED display goes out.
Setting the support levels
The Shimano E6100 series oers you dierent modes of assistance with the fol-
lowing qualities:
Eco =
Lowest pedal assistance. Particu-
larly suitable for journeys on level,
good road surfaces without any
particular gradients and with  low
load. On long distances, the highest
range is achieved in Eco mode.
Normal =
Medium pedaling support. Suitable
for rides on tracks with alternating
flat and slightly uphill sections and
changing surfaces and for rides with
 medium load.
High =
strongest pedal assistance, suita-
ble for rides on challenging rou-
tes with many inclines and with 
heavy load.
Go =
very light push power to help
you push the e-muli. Suitable for
pushing the wheel with heavy
load or on heavy slopes.
Battery and control unit
Shimano Steps battery 500 Wh