98
99
Open the frame lock as rarely as possible. The screws on the
frame lock must be loosened and screwed in very carefully.
Make sure that the threads are clean and that the screws do
not jam. Careless handling of the frame lock can damage the
threads of the frame lock and thus make the entire frame un-
suitable.
When new belt system is run in, the blue layer on the inside
of the belt quickly wears o on the inside of the belt. This
removal does not represent wear of the belt. The blue layer is
on the belt solely for production reasons. It is release agent
to enable the belt to be released from its mold during pro-
duction. The blue layer has no technical signicance for the
function of the belt.
Belt drive and frame lock
To Next Page
Loading...