- Pin/ball head to 65 cm height #
- Coupling plate with M12 thread at various heights for couplings #
- Work area: 6 to 8 km
- Operating time: 3-4 workdays
Always supplied with 2 batteries (in the drive box), external
charger, ball and cone coupling. There are many options to choose from.
2.3 Packaging, loading / unloading, towing, recycling
Packaging
The Multi-Mover XL35 is secured with straps on support beams on a pallet, surrounded by a protec-
tive cardboard box.
Removing the packaging
Remove the clamping strips at the wheels.
Avoid injury and damage as a result of incorrect placement of the lift truck's lift forks.
Loading and unloading
If the Multi-Mover XL35 has to be moved by means of a lift truck, the lift forks must be placed at the
heaviest part at the rear of the Multi-Mover XL35, between the 2 large wheels.
Towing
Caution! Avoid serious damage to the drive, the Multi-Mover XL35 may only be moved or towed if
the hand brake tie rod (round black button) on the dashboard has been pulled out.
Recycling of the packaging
Save the packaging for possible future transportations.
If you want to remove the packaging, you must observe the local and national regulations concerning
plastic waste processing.
To Next Page
Loading...