3.23
As the operator you will determine the limits for "safe driving / working" with the Multi-Mover
XL35.
Do not take any risks.
Be particularly careful in case of obstacles or uneven terrain.
4 PREPARATION
4.1 Application
The Multi-Mover XL35 was developed for;
- moving trailers, caravans, trailers with or without goods, order picking, etc.
- driving over flat, dry, metalled or unmetalled terrain (e.g. warehouse, greenhouse, lawns etc.)
The Multi-Mover XL35 is not suitable for transporting trailers with people.
The Multi-Mover XL35 is not suitable for moving;
- goods containing toxic substances
- goods containing explosive substances
- goods containing hazardous substances
- combustible substances
- other liquids and hazardous substances than stated above
Optional we offer a ATEX modified XL35
The Multi-Mover XL35 does not have permission to be driven on public roads without the options
required.
Only use the Multi-Mover XL35 for the purpose for which it was designed.
For other applications, the CE mark does not apply.
The electric components and wiring have been made splash-proof (IP54). Multi-Mover XL35 should
be covered if used in a spray plant or car-wash etc. and should also be stored in a dry location.
Although Multi-Mover has been designed for use out of doors and in poor weather conditions, it
should not be driven in to water.
Only the following "original" “Multi-Mover Europe BV” parts and accessories may be used for the
Multi-Mover XL35.
Multi-Mover Europe BV is excluded from any liability for damages or consequential damages that are
caused by "original" parts that have not been supplied by us.
4.2 Operator
Only persons who have had a thorough (internal) theoretical and practical training for driving the
Multi-Mover XL35, are allowed to drive with the Multi-Mover XL35.
The training programme should cover:
- the application possibilities and the limitations
- the control and operating components
- the safety regulations
- daily and periodical maintenance
To Next Page
Loading...