the corresponding keys of multimeter.
⚫ Voice out function
Provide an audible out of the readings through the text-to-speech (TTS) engine on
your Android device. Click the icon on the top right of the screen to turn on
voice out. Click to turn off. In settings menu on your Android device, you can
set the language-specific voice for the spoken text, or speech rate etc.
You may change to different voices by installing different TTS engines.
TTS engines can be downloaded by scanning QR Codes or visit https://uk.farnell.com/
⚫ Upgrade Online: Click , and click "About". Click "Upgrade".
⚫ Data Graph and Table: Click to view data graph and table. Click to
show setting menu.
Data Graph&Table
Trending
graph
Data table
Show menu
Setting menu:
Zoom Controls
Read the saved file (.CSV)
Save the displayed data into .CSV file
Share the measurements via the installed sharing apps
Clear the data that is being displayed
Record Interval: Set the record interval in the application
software.
Enable Period: Log data within the defined period.
Record Period: Define the period time if the period is enabled.
Fill: Check to fill the area as blue below the data line.
Note: In trending graph, you can pinch the screen to zoom. The Y axis (value) can be
zoomed by gesturing along the up-down direction, and the X axis (time) can be
zoomed by gesturing along the left-right direction.
To Next Page
Loading...
Need help?
General
