Warning: To avoid electrical shock or damage to the multimeter, ensure that
the insides of the casing stay dry at all times.
Cleaning
To clean the instrument exterior, perform the following steps:
Wipe the dust from the instrument surface with a soft cloth. Do not make any scuffing on
the screen when clean the LCD. Clean the instrument with a wet soft cloth not dripping
water. It is recommended to scrub with soft detergent or fresh water. To avoid damage
to the instrument, do not use any corrosive chemical cleaning agent.
Dirt or moisture in the terminals can distort readings. Follow the steps below to clean
your multimeter.
To Next Page
Loading...
Need help?
General
