Need help?Do you have a question about the multicomp pro MP740029 and is the answer not in the manual?
Diagram illustrating the layout of the rear casing of the soldering station.
Guide on how to adjust the temperature settings for active channels.
Procedure for safely emptying the solder waste collector tube.
General| Power | 130W |
|---|---|
| Voltage | 230V |
| Tip Temperature | 450°C |
| Tip Type | Screwdriver |
| Weight | 1.2 kg |
| Cable Length | 1.5 m |
| Power Rating | 130W |
To Next Page
