To Next PageTo Next PageWhy is my Multilaser One p3213 not turning on?
Your Multilaser Car Stereo System might not be powering on because it is not properly connected to power. Ensure the vehicle power is correctly installed and the shift knob is in the ACC position. Also, check if the fuse is burnt. If so, ensure there's no short circuit and replace the fuse.
What to do if my Multilaser One p3213 has no sound?
If your Multilaser Car Stereo System isn't producing any sound, first check if the system is muted or the volume is set to zero. Adjust the volume accordingly. If that's not the issue, inspect the wiring based on the wiring diagram to ensure all wires are properly connected.
Why does my Multilaser Car Stereo System have noises and sound distortion?
Noises and sound distortion from your Multilaser Car Stereo System may be due to speaker cables being pressed by screws. Please check the speaker cables. Also, check if the speaker cables are short-circuited and properly connect the wires.
General| Brand | Multilaser |
|---|---|
| Model | One p3213 |
| Category | Car Stereo System |
| Language | English |
Step-by-step guide for installing the unit into the vehicle's dashboard.
Instructions for removing the device using a dismantling key and hook lock.
How to turn the unit on and off using the power button.
Shifting between operating modes like FM, LIN, USB, and SD.
Adjusting the audio volume using the control knob.
Accessing and adjusting audio settings like Bass, Treble, Balance, Fader, EQ, Loud, and Volume.
Muting audio and controlling the illumination of the unit's buttons.
Automatic scan, station shifting, and saving radio stations.
Procedures for saving radio stations using single numeric keys.
Procedures for saving radio stations using combinations of numeric keys.
How to recall saved radio stations using single or composite numeric key presses.
Controlling music playback including play/pause, repeat modes, and track/folder navigation.
Connecting external audio sources via the AUX port.
Technical details for the FM radio reception, including tuning range and sensitivity.
Technical details for the power amplifier outputs and impedance.
General technical specifications including tone controls, power, dimensions, and mass.
