19
3. Installation and Removal Steps
3. Installation and Removal Steps
3.1 Installation
This is security installation, please refer to the illustration and detailed step-by-step installation:
1. Put the machine on the right location in the car, connect the machine with reference to the wiring
diagram , test if machine can work properly.
2. After test OK, wrap the connect wire with insulating tape to ensure that the wiring completely
insulated.
3. Press hook of sets 1 inward, set sets 1 into the dashboard and fix it.
4. Push machine 2 into metal frame and lock it.
Parts List
1.
Put into the mounting sleeve.
1
2
3
1
2.
Bend these clown outward for a thig fit, if
necessary..
To Next Page
Loading...