Multilaser One p3213 - Basic Operation; Power On and Off; Mode Selection; Volume Control

To Next Page

To Previous Page

5. The basic operation

Power ON/OFF

In standby status, long press(2 seconds) button to power it off; short press button to power

it on.

Mode

In the state of power on, short press button to shift among the following states:

FM>LIN>USB>SD>FM (Remark: Make sure facilities requested are workable, if not, would skip

without display), Default status: FM.

Vol

Turn button left/right to decrease or increase the volume.

Vol Class: 0 ~ 40

Encoder SEL

Short press button continuously, it shows:

“BASS > TREBLE > BALANCE > FADER > EQ > LOU > VOL”

•BASS: Turn the knob left/ right to decrease/increase Bass. Bass Class: -7 ~ +7.

•TREBLE: Turn the knob left/ right to decrease/increase Treble. Treble Class: -7 ~ +7.

•BALANCE: Control R/L speaker balance, turn left to plus L and minus R, turn right to plus R and

minus L. R/L speaker balance Class: L9 ~ R9.

•FADER: Control B/F speaker balance, turn left to plus Back speaker and minus Front speaker, turn

right to plus Front speaker and minus Back speaker. B/F speaker balance Class: F9 ~ B9.

•EQ: To shift among POP > ROCK > JAZZ > CLAS > NORM.

•LOUD: Turn the knob left/ right to on/off LOUD.

•VOL: Turn the knob left/ right to decrease/increase volume. Vol Class: 0 ~ 40.

5. The basic operation