To Next Page

To Previous Page

Section 3

Whilst still in the brix screen, using button 2(-)

& 3(+) select the syrup avour to brix.

Press button 4. This will take you to the screen

to adjust the syrup pump voltage: Example: 2V4

equates to 2.4 volts.

With a measuring cup / brix cup, under the

dispense nozzle, press button 4 to dispense a 7

sec. syrup pour.

Adjust the pump voltage using buttons 2(-) and 3(+)

toincreaseordecreasethesyruppumpowrate.

Repeat until the correct volume is dispensed.

Press button 1 to move back to the previous

screen.Pressbutton3(+)totoggletoavour2

Press button 4. to move to the voltage setting

screenforsyrupavour2andthenrepeatthe

steps, as above

Onceavour2owratehasbeenset,thensetup

avours3&4.Pressbutton1twicetobringyou

out of the Brix screens and back to the main menu.

7. Disable carbonated and still water dispense

Press button +3+ to move to the disable

carbonated and still water function.

This feature allows you to disable the still and

carbonated water dispense buttons. Both buttons

are disabled together, there is no option to disable

each individually.

Press button 4 to access the menu.

A tick in the box shows that the carb and still water

dispense is enabled. Press button 4 to toggle

between Enabled and Disabled.

Press button 1 to go back to the previous menu.

Press button 3(+) to go to the next menu.

Multiplex Albi 4 14-2003-05 User Manual

Questions and Answers: