Multiplex MiniMag - Parts List

35
Parts List Mini Mag kit # 21 4211
Part No. off Description Material Dimensions
1 1 Building instructions Paper A4
2 1 Decal sheet Printed adhesive film 400 x 700 mm
3 1 Left-hand fuselage shell Moulded Elapor foam Ready made
4 1 Right-hand fuselage shell Moulded Elapor foam Ready made
5 1 Canopy Moulded Elapor foam Ready made
6 1 Wing Moulded Elapor foam Ready made
7 1 Tailplane Moulded Elapor foam Ready made
8 1 Fin Moulded Elapor foam Ready made
Small parts set
20 2 Velcro tape, hook Plastic 25 x 60 mm
21 2 Velcro tape, loop Plastic 25 x 60 mm
22 2 Canopy latch clip Inj. moulded plastic Ready made
23 2 Canopy latch lug Inj. moulded plastic Ready made
24 4 Glue-fitting horn Inj. moulded plastic Ready made
25 4 Pushrod connector Metal Ready made, 6 mm Ø
26 4 Washer Metal M2
27 4 Nut Metal M2
28 4 Socket-head grubscrew Metal M3 x 3 mm
29 2 Allen key Metal 1.5 mm A/F
30 2 Aileron pushrod, one Z-bend Metal 1 Ø x 70
31 1 Spar joiner Inj. moulded plastic Ready made
32 1 Screw Plastic M5 x 50 mm
33 1 Wing bolt support A Inj. moulded plastic Ready made, M5
34 1 Wing bolt support B Inj. moulded plastic Ready made, M5
Wire set
40 2 Spar tube GRP tube 6 / 4 Ø x 300 mm
41 1 Steel elevator pushrod, one Z-bend Metal 0.8 Ø x 355 mm
42 2 Steel rudder pushrod, one Z-bend Metal 0.8 Ø x 325 mm
43 1 Elevator snake outer sleeve Plastic 3 / 2 Ø x 275 mm
44 1 Rudder snake outer sleeve Plastic 3 / 2 Ø x 225 mm (275 mm*)
45 1 Elevator snake inner tube Plastic 2 / 1 Ø x 300 mm
46 1 Rudder snake inner tube Plastic 2 / 1 Ø x 275 mm (300 mm*)
*supplied length -> cut to correct length
Power set
60-63 1 Motor mount, Permax 400 (1 off) See below
50 1 Motor Permax 400 6 V Ready made
52 1 Propeller Plastic 125 x 110 mm
Permax 400 motor mount (1 x), two-part incl. screws
60 1 Motor bulkhead Inj. moulded plastic Ready made
61 1 Motor bulkhead holder Inj. moulded plastic Ready made
62 2 Screw Metal M2.5 x 4 mm
63 4 Screw Metal 2.2 x 13 mm
Undercarriage set
70 1 Main undercarriage unit Metal 2.5 Ø, ready made
71 2 Lightweight wheel Plastic 53 Ø, 2.5 mm bore
72 4 Collet Metal 2.7 / 7 Ø x 5 mm
73 4 Socket-head grubscrew Metal M3 x 3 mm
74 1 Undercarriage support Plastic Ready made
CD instructions / movie
80 1 CD instructions / movie Ready made