12
Part No. Description Material Dimensions
No. off
1 1 Building instructions Paper A4
2 1 Decal sheet Printed self-adhesive film Ready made
3 1 Fuselage / wing Moulded styrofoam Ready made
4 1 Canopy Moulded styrofoam Ready made
5 1 Fin Moulded styrofoam Ready made
6 1 Internal fuselage Vac. moulded plastic Ready made
7 1 Landing skid Self-adhesive film 50 x 520 mm
8 1 Decal set Printed
Accessories
20 2 Aileron horn Plastic Ready made
21 2 Aileron horn screw Metal 2.2 x 6.5 mm
22 2 Pushrod Metal 0,8 Ø x 225 mm
23 1 Bowden cable outer sleeve Plastic 3/2 Ø x 200 mm
24 2 Pushrod retainer sleeve Plastic Ready made
25 2 Screw-hook Metal Ready made
26 1 Rubber band Plastic Ready made
27 2 Velcro tape, hook Plastic 25 x 60 mm
28 2 Velcro tape, loop Plastic 25 x 60 mm
Wooden parts
40 2 Aileron actuator Obechi 5 x 5 x 150 mm
41 2 Servo support rails Balsa 10 x 10 x 25 mm
42 2 Screw-hook support plate Plywood 3 x 15 x 15 mm
43 1 Canopy locating tongue Plywood 3 x 20 x 30 mm
Power set
50 1 Electric motor, factory-wired Permax 400 Ready made
51 1 Propeller Plastic 125 x 110 mm
To Next Page
Loading...
