Multiplex PROFI CAR 403 - ABS = Advanced Braking System (PROFI CAR 707 Only)

30
The current trim setting is indicated on the screen by a vertical bar. In the example on
the right the lock point of the first brake servo has been offset in the direction of
„stronger braking effect“ by 3 trim increments.
T
STEPSTEP
Search for menu
point
Select parameter
LP = Lock Point
STEP
LP 78
%
Set size of
trim increment
1 – 10%
' TIP !
If you have a second brake servo (vehicle type „5 CH“), the increment size you select
applies to both trim rockers (B and D).
5.3. ABS = Advanced Braking System (PROFI CAR 707 only)
In the model car racing field ABS corresponds to an intermittent brake: instead of
being applied constantly, the brake is applied then released again continually at
short intervals. This method of braking keeps the vehicle on line better, making it
easier to steer under heavy braking.
In the PROFI CAR the ABS function is activated automatically when the steering
deflection exceeds a variable threshold (TH = threshold point).
' TIP !
If you set the threshold point to 0%, ABS is effective all the time.
This allows you to try out its effect on a straight stretch of track.
A A
ABSABS
Search for menu
point
ABS
AB 3
%
Select parameter
TH threshold point 0 – 50%
EF Effect 0 – 4
Set value Effect
0 OFF
1 soft
...
4 hard