32
The lock points for the two brake servos can be
trimmed using the rockers B and D (see picture). We
have selected these particular rockers so that you
can easily remember the assignment:
front rocker è front brake
rear rocker è rear brake
This is the procedure:
A
BRAKE1BRAKE1
BRAKE2BRAKE2
Search for menu
point
Select the brake
curve
Example:
Lock point 82%
BRAKE2
LP 82
%
Set value
IDL Idle -50% to +50%
EP Engage Point
0 (OFF) to 100%
LP Lock Point 0 to 100%
EXP EXPO ± 100%
Press any menu button (except A ) to return to the operating display.
To Next Page
Loading...
