R2000 RIDE-ON STATIC ROLLER — OPERATION & PARTS MANUAL — REV. #2 (03/20/06) — PAGE 29
R2000 — PREPARATION FOR LONG -TERM STORAGE
Roller Storage
For storage of the roller for over 30 days, the following is
recommended:
z
Drain the fuel tank completely, or add STA-BIL to the
fuel.
z
Run the engine until the fuel in the injection system is
completely consumed.
z
Completely drain used oil from the engine crankcase
and fill with fresh clean oil, then follow the procedures
described in the engine manual for engine storage.
z
Drain water tank
z
Clean the entire roller and engine compartment.
z
Remove battery and store it in cool dry place.
z
Cover the roller and place it a clean dry area, that is
protected from harsh elements.
z
Remove ignition key, and store in a safe place.
To Next Page
Loading...