MULTISPAN MS 1248-M1 - Set Point Selection

www.multispanindia.com
Page-5
MS-1248-M1
Note: Set value can be changed by or key.
MENU-3
Press key 2 Second.
Press key to save & exit.
Low / High set point-1
Low / High set point for Group 4,
High / Trip set point for Group1,
High / Trip set point for Group 4,
Hysteresis-1
300
100
300
5
5
H5-1
L5-4
H5-4
Hy1
Hy4
(Repeat the same procedure for all 4 group).
(Repeat the same procedure for all 4 Hysteresis)
100
L5-1
Set point Selection
SET
Press key.
SET
Press key.
SET
Press key.
SET
Press key.
SET
Press key.
SET
Press key.
SET
ENT
Main Menu: To change set value & hystersis based on relay mode & grouping