MULTISPAN MS-1248 - Basic Configuration; Main Menu

www.multispanindia.com
Page - 2
MS-1248
Press key
SETSET
Press key
SETSET
Press key
SETSET
Press key
SETSET
Press key
SETSET
Press key
SETSET
Press key
SETSET
Repeat for all Group
Press key to save & exit
Range: 1 to 200
Range: 1 to 200
Range: 1 to 200
Main Menu: To change set value & hystersis based on relay mode & grouping
Group No 1 If 1st channel, have a set point as a high alarm, 1 relay
Group No 2 nd channel, have a set point as a low alarm, 1 relay
For, 3rd, 4th, 5th, 6th, 7th, 8th channel have a set point as high & low alarm, 2 relay
For Example:
Set value change by or key.
Set value change by or key.
Set value change by or key.
Set value change by or key.
Hystersis value change by or key.
Hystersis value change by or key.
Hystersis value change by or key.
Basic ConfigurationBasic Configuration
6 0
3 0
4 0
8 0
1
1
1
S - 1
S - 2
S - 3
S - 3
h y 1
h y 2
h y 3
H
L
L
H