EasyManua.ls Logo

Multitech MultiModem MT5600ZDX - Page 67

Multitech MultiModem MT5600ZDX
83 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
B Technical Specifications
63
Frequency Stability ±0.01%
Receiver Sensitivity -43 dBm under worst-case conditions
AGC Dynamic Range 43 dB
Interface RS-232C/V.24/V.28
Connectors DB25F RS-232C connector, one RJ-11 phone jack, power con-
nector
Cables One modular telephone cable (USA); country-specific cord
for UK and International models; one 9-pin to 25-pin serial
cable for UK and International models; external power
transformer and cord
Note: Any cables connected to the computer should be
shielded to reduce interference.
Diagnostics Power-on self test, local analog loop, local digital loop,
remote digital loop
Indicators LEDs for Transmit Data, Receive Data, Carrier Detect,
various speed indicators, Off Hook, Terminal Ready, Error
Correction, and Fax
Speaker 1-inch speaker for call progress monitoring
Speaker and MultiModemZDXV and MultiModemZDXVe
Microphone Jacks
Manual Controls Power switch
Operating Temperature Temperature range 0°–50°C (32°–120°F); humidity range
2090% (non-condensing)
Power Requirement 115 VAC, 60 Hz, 16 W; 230V/50 Hz optional (international)
Power Consumption 5 Watts
Dimensions cm: 14.8 long × 10.8 wide × 2.6 high
inches: 5.7 long × 4.25 wide × 1.15 high
Weight grams: 224
ounces: 8
Limited Warranty 10 years

Table of Contents

Other manuals for Multitech MultiModem MT5600ZDX

Related product manuals