Multitone RPR 551IS - Page 30

RPR 550IS Series
TM1188 Issue 1Page 2 - 10
OPTIONS AND FEATURES
31. Some of the facilities on the pager have a number of options so that individual user
requirements can be met. Options can be programmed at the time of purchase or at a
later date.
Display Reversal
32. The orientation of the display can be reversed by pressing the Mute button during the
status interrogation mode (press the Cancel button from the display quiescent
condition). The pager recommences status interrogation with the display inverted.
When switched off the pager retains the most recent display direction, which is stored
in the EEPROM.
Mute/On Status
33. Press the Mute button during the quiescent condition of the pager display to find out the
current status of the pager. If in normal mode the pager emits one pip and the display
shows ` on '. If in Mute mode the pager emits two pips and the display shows ` mute '. If
no further buttons are pressed the pager returns to the quiescent display condition after
2s.
34. Hold the Mute button down for 1.5s to change modes (if Mute is enabled). The new
On/Mute status is displayed and the appropriate audible pips are sounded.
Time-of-Day
35. Time-of-Day information appears on the display in the following ways:
a) Continuous Display Mode
During the display quiescent condition, when no calls are being received or
displayed, Time-of-Day, if selected, appears on the display in the following format:
Hours:Minutes
5:58
17:58
If Time-of-Day is selected but not received for two minutes the pager displays:
--:--
If the Time-of-Day is not selected the pager displays:
ON