Multitone RPR 551IS - Test Equipment; Test Equipment, Tools and Ancillaries; Tools and Ancillaries

RPR 550IS Series
TM1188 Issue 1Page 5 - 4
TEST EQUIPMENT, TOOLS AND ANCILLARIES
Test Equipment
7. The following test equipment is required:
& IBM PC or equivalent
& P648 Programming Unit
& P648H Programming Software, RPR 550 Series
& P910/911 Cable Assembly, Computer to P645
& P645 Test Encoder (including power supply)
& P645A Test Encoder Software V04.00
& RF Signal Generator
& Oscilloscope
& RF Millivoltmeter with High Impedance, Low Capacitance Probe
& P637 Alignment and Fault-Finding Jig
& P637F Adaptor Plate RPR 550 Series
& SINAD Meter
& AC Millivoltmeter
& 50 6 Miniature Co-axial Cable, Type RG178B/U
& Digital Multimeter
& P800 TEM Cell
Tools and Ancillaries
8. The following tools and ancillaries are required:
& DC Power Supply 1-1.5 Volts
& RF Board Extraction Tool (Part No. 8961-1097)
& Case Front (Part No.0261-0107) (Modified)