Hand Extruder MEK-18-S / MAK-18-S
Page 18/20 Issue 03.2011/Rev. 03 MUNSCH Kunststoff-Schweißtechnik GmbH
8 Technical Data
Type designation MEK MAK
Welding materials
PP, PE, PVDF PP, PE, PVDF
Welding rate, approx.
18-S = ∅ 3 mm: 1.1 kg/h PP/PE
18-S = ∅ 4 mm: 1.8 kg/h PP/PE
18-S = ∅ 3 mm: 1.1 kg/h PP/PE
18-S = ∅ 4 mm: 1.8 kg/h PP/PE
Welding rod
Welding rod ∅ 3 and 4 mm Welding rod ∅ 3 and 4 mm
Application range 18-S = Wall thicknesses 4-15 mm and
film/sheeting welds
18-S = Wall thicknesses 4-15 mm and
film/sheeting welds
Weight 18-S = 4.5 kg 18-S = 4.8 kg
Drive
230 V AC with speed control 230 V or 120 V AC with speed control
Air preheater
2100 W / 230 V 2300 W / 230 V
1750 W / 120 V
Air supply
External air source Integrated air supply
Air rate
max. 300 l/min at 0.4 bar ------------
Cold start protection
Start temperature interlock and startup
timer for melt and preheat air
Start temperature interlock and startup
timer for melt and preheat air
To Next Page