Munters Rotem RBU-27 SE User Manual

26
Figure 17: Ground Connection
8.4 What Should Be Grounded?
o Any equipment that is, or could become energized, even accidentally, should be grounded.
o Electric circuits should be wired with a 3-wire conductor consisting of hot, neutral and grounding wires.
The grounding wire should be attached cleanly and securely to devices or systems to be grounded. The other end of the
grounding wire should be attached to the ground bus on the main panel.

Munters Rotem RBU-27 SE Specifications

General

Brand	Munters
Model	Rotem RBU-27 SE
Category	Controller
Language	English