Muratec MFX-1450 User Manual

5-43
5.2.4 PRINTER SECTION
SOLENOID
1) Remove the Cover option. (See page 5-21)
2) Remove the Cover shield. (See page 5-21)
3) Remove the Cover back. (See page 5-33)
4) Remove the Bracket solenoid mounting screw, and then remove the Bracket solenoid.
5) Cut the Cable tie, and disconnect the connector.
6) Remove the Solenoid mounting screw, and then remove the SOLENOID.
Solenoid
Cable tie
Bracket solenoid
CLUTCH (MG)
1) Remove the Cover option. (See page 5-21)
2) Remove the Cover shield. (See page 5-21)
3) Remove the Cover back. (See page 5-33)
4) Remove two plastic rings.
5) Disconnect the connector of Clutch (MG), and then remove the CLUTCH (MG).
Clutch(MG)
Clutch(MG)

Muratec MFX-1450 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Print Speed (Black)	14 ppm
Print Resolution	600 x 600 dpi
Display	LCD
Paper Capacity	250 sheets
Max Copying Resolution	600 x 600 dpi
Max Fax Transmission Speed	33.6 kbps
Duplex Printing	Manual
Interface	USB 2.0, Ethernet
Memory	32 MB
Connectivity	USB
Media Type	Plain paper, Envelopes
Maximum Paper Size	Legal
Type	All-in-One Printer