4-4 Setting the print controller
Setting the print controller
NOTE
•This setting is used only when you cannot specify the settings on the printer drivers.
When settings are available on printer drivers, those settings will be used.
•This setting is displayed only for PCL 5e or 6 printer drivers is installed.
Setting procedure
1
Press <Menu>.
2
Press [Setting].
3
Select “Default Setting”, and press [Enter].
4
Select “Printer Settings”, and press [Enter].
5
Select “Print Controller Setting”, and press [Enter].
6
Select the item you want to set, and press [Enter].
For details about setting items, see the following “List of print controller settings”.
7
After setting, press [Close].
List of print controller settings
Function Description Settings
Copies Set the number of copies.
1 to 999: 1 set
Orientation Set the print orientation.
Portrait
Landscape
Paper Size Set the paper size.
Letter, Legal, H.LTR, A4, A5,
A6, F4, Executive, DL, COM10,
Monarch, Postcard, OHP (LTR)
Paper Source Set the paper source.
Auto
Cassette 1
Cassette 2
*1
Bypass
Output Tray
*1
Select a paper output destination. Internal Tray
External Tray
Duplex Set whether to use duplex printing.
OFF
ON
Binding Set the binding position for duplex printing.
Long Edge
Short Edge
To Next Page
Loading...
Need help?
General
