-- 6 --
bm42d1ea
5 INSTALLATION
The installatio n must be executed by a p rofessional.
CAUTION!
This product is intended for industrial use. In a domestic environment this product may
cause radio interference. It is the user’s responsibility to take adequate precautions.
WARNING!
When welding in an environment with increased electrical danger , only power
sources intended for this environment may be used. These power sources are
marked with the symbol
5.1 Lifting instructions
Order number for lifting eyelet can be found on page 20.
Note! If another mounting device is used, this should be insulated from the wire feed
unit.
GB
To Next Page
