EasyManua.ls Logo

Murphy PV485 - Specifications; Technical; Environmental; Mechanical

Murphy PV485
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Section 78 00-02-1018
2017-05-23 - 6 -
Specifications
Technical
Display: Bonded 4.3” color transmissive TFT LCD
Resolution: WQVGA, 480 x 272 pixels, 16-bit color
Aspect Ratio: 16:9
Orientation: Landscape
Backlighting: LED, 900-1000 cd / m2 (30,000 hr lifetime)
Microprocessor: Freescale iMX35 32bit, 532Mhz
Operating System: QNX Real-Time Operating System
Flash Memory: 256 MB (expandable to 8GB)
RAM: 128 Mbytes DDR2 SDRAM
Operating Voltage: 6-32 VDC, protected against reverse polarity and load-dump
Power Consumption: 10W max
CAN: (1) CAN 2.0B
Serial: (1) RS485 (Modbus Master/Slave)
Protocols: J1939; FreeForm Can support
Connection: (1) 35-pin AMP seal connector (AMP776231-4)
Keyboard: 5 tactile buttons
USB: (1) USB 2.0 host (full speed)
Digital Inputs: (3) digital inputs
Digital Outputs: (4) low side open-drain, capable of sinking 500 mA
Analog Inputs: (6) total, (4) software configurable (0-5V, 4-20mA, Resistive) + Battery Voltage +
2nd Battery Voltage
Analog Outputs: (1) 0-5V
Frequency Inputs: (1) Alternator and Magnetic Pickup
Real-time Clock: with battery backup
Environmental
Operating Temperature: -40°C to +85°C
Storage Temperature: -40°C to +85°C
Protection: IP 67, front and back.
Emissions/Immunity: SAE J1113 or customer-specified; (CE) - EN61000-6-2, EN12895, ISO 13766
Vibration: Random vibration, 7.86 Grms (5-2000 Hz), 3 axis
Shock: ± 50G in 3 axis
Mechanical
Case Material: Polycarbonate/ABS